Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Remote Battery of the Skoda Kamiq

Model: Skoda Kamiq MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

Video tutorial

These simple steps will show you how to replace the battery in the Skoda Kamiq key remote. First, take your remote and start by removing the plastic cover on the back by prying at the sides with something thin.

Then, remove the battery found inside, as shown in the video. At this point, install the new battery of the correct type (in this case, a CR 2032 3V); insert the battery the right way round and reattach the plastic cover, using the key buttons to verify it works!


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Skoda Kamiq (2018-2026 / MK 1) Following the instructions in this guide, you will see how to disassemble and replace the battery in the Skoda Kamiq key remote. First, take your rem…
Skoda Kamiq (2018-2026 / MK 1) Today, with this brief video guide, you will see all the steps necessary to replace the remote battery of your Skoda Kamiq, first series model. First…
Skoda Kamiq (2018-2026 / MK 1) No complications here, the clock on the Skoda Kamiq is easily adjustable and does not require any external equipment to connect to the vehicle or any…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos