Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulbs on a Skoda Fabia?

Model: Skoda Fabia Mark3, NJ - Years 2014-2021
Part: Tail light bulb

In this tutorial, you will see how to replace the rear light bulbs on a Skoda Fabia, a very simple and quick operation. First, ensure that the instrument cluster is off for safety. Then, open the boot lid, locate the two bolts along the inner edge of the light in question, and unscrew them using a Torx T30 key. Next, separate the light from the bodywork, disconnect the power connector, and open the internal base. Finally, replace the faulty bulbs and reassemble everything by following the reverse procedure.

Posted on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on a Skoda Fabia?
How to Replace the Rear Lights on a Skoda Fabia?
Skoda Fabia (2007-2014 / Mark2, 5J) In this tutorial, you will see how to replace the rear lights on a Skoda Fabia, a very simple and quick operation. First, ensure that the key is not …
How to replace the rear lights in the Skoda Fabia?
How to replace the rear lights in the Skoda Fabia?
Skoda Fabia (2007-2014 / Mark2, 5J) In this tutorial we can see how to replace the rear lights in the Skoda Fabia, an extremely simple and fast operation. First of all, make sure that t…
How to install the fog lights of the 2019 Skoda Fabia
How to install the fog lights of the 2019 Skoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) Today we will explain how to install fog lights on the 2019 Skoda Fabia after replacing the bulbs. Close the cap of the light fixture and connect the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos