Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and filter in a Škoda Karoq

Model: Skoda Karoq - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

Video tutorial

To change the engine oil and filter in a Škoda Karoq, it is necessary to slightly warm the engine and then switch it off. Position the vehicle on a flat surface and safely lift it, removing any lower protection. After placing a container under the oil sump, unscrew the drain plug and allow the used oil to fully drain.

Next, locate the oil filter, which varies depending on the engine type, and proceed to replace the filter element and the corresponding seals. Then, close the drain plug with the appropriate seal and add new oil, adhering to the quantity and specifications indicated by the manufacturer.

Finally, briefly start the engine, check for leaks, and after a few minutes, verify the oil level, adjusting if necessary.


Posted on 21 October 2026 by ScegliAuto


Related tutorials

In the 2023 Skoda Karoq, how do you reset the Service light?
In the 2023 Skoda Karoq, how do you reset the Service light?
Skoda Karoq (2017-2026 / MK 1) For those who have no idea how to perform the periodic maintenance of their 2023 Skoda Karoq on their own, they can watch the video posted above and …
How to Replace the Air Filter on a Skoda Karoq
How to Replace the Air Filter on a Skoda Karoq
Skoda Karoq (2017-2026 / MK 1) If you want to replace the air filter in your Skoda Karoq yourself, simply follow these steps. The entire procedure will take just a few minutes to c…
Reset Engine Oil Change on Skoda Karoq
Reset Engine Oil Change on Skoda Karoq
Skoda Karoq (2017-2026 / MK 1) This brief video guide shows how to reset the engine oil life on a Skoda Karoq. This operation is very simple and can be done independently after cha…

Other guides you may be interested in

How to Disable the Safe Lock on a Volkswagen Golf

The safe lock is an anti-theft system that prevents thieves from accessing the vehicle. This device locks the doors, both externally and internally, when the driver activates the central locking remote after leaving the vehicle. To disable it permanently, you need to use a diagnostic program like VCDS, which connects to the vehicle via the OBDII port. Wait for the connection and recognition of the control unit, then select the locks present and locate the safe lock to disable it. The job will then be complete.

Watch the video!


by ScegliAuto

More videos