Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Skoda Kamiq 1.0 TSI

Model: Skoda Kamiq MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Engine oil

Video tutorial

This guide provides instructions for performing routine maintenance by changing the engine oil and oil filter on a Skoda Kamiq 1.0 TSI. First, lift the vehicle and start removing the plastic covers found under the engine by unscrewing all the fastening screws.

Then, unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, unscrew the oil filter cartridge and replace it with a new one. Finally, top up with new engine oil.


Posted on 22 June 2026 by ScegliAuto


Related tutorials

Oil and Filter Change on a Skoda Kamiq 1.0 TSI
Oil and Filter Change on a Skoda Kamiq 1.0 TSI
Skoda Kamiq (2018-2026 / MK 1) Let's see how to perform the oil and filter change on a Skoda Kamiq: position the car on axle stands, remove the lower cover, and place the collectio…
How to replace the cabin air filter of the Skoda Kamiq
How to replace the cabin air filter of the Skoda Kamiq
Skoda Kamiq (2018-2026 / MK 1) If the time has come to replace the cabin air filter of your Skoda Kamiq and you want to do it yourself, then all you have to do is follow the proced…
Resetting the engine oil change indicator (service) light on the Skoda Kamiq.
Resetting the engine oil change indicator (service) light on the Skoda Kamiq.
Skoda Kamiq (2018-2026 / MK 1) Today's procedure will allow us to reset the service light for the regular maintenance of the engine oil change in the Skoda Kamiq. First, we get int…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos