Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Panel of the Boot Lid on the Skoda Superb

Model: Skoda Superb 3V, B8 - Years 2015-2023
Part: Door trim panel

In this video tutorial, you will see the steps to remove and replace the inner panel of the rear boot lid of the Skoda Superb. First, open the rear boot lid of your car and start removing the various plastic caps located on the panel to access the securing screws underneath; then unscrew these screws, as shown in the video. Next, pry at the sides of the panel to remove it, gaining access to the lock and the rear wiper motor; then reassemble everything by applying the reverse procedure!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Skoda Superb
How to reset the TPMS light on the Skoda Superb
Skoda Superb (2008-2015 / B6, 3T) If the TPMS light on the display of your Skoda Superb remains on even though there is no puncture, you must proceed with the manual reset of the ligh…
Where is the fuse box located in the Skoda Superb 2014?
Where is the fuse box located in the Skoda Superb 2014?
Skoda Superb (2008-2015 / B6, 3T) If you want to locate the fuse box of your Skoda Superb (2014) safely and in just a few seconds, all you have to do is read the following guide caref…
Where is the Fuse Box Located on a Skoda Superb?
Where is the Fuse Box Located on a Skoda Superb?
Skoda Superb (2001-2008 / B5, 3U) To easily find the fuse box of your Skoda Superb, simply follow the steps described in the following guide. First, ensure that the car is parked safe…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos