Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Boot Light Fuse in a Skoda Rapid?

Model: Skoda Rapid MK 1 - Years 2012-2019
Part: Interior dome light bulb

If the boot lights in your Skoda Rapid suddenly stop working and the bulbs are in good condition, it is likely a fault with the respective fuse, the location of which is indicated in this video. As shown, the fuse is located in the fuse box inside the cabin, specifically in the lower left area of the dashboard on the driver's side. It is labelled F6. If faulty, ensure you use a replacement with the same specifications and always work with the vehicle turned off to avoid any damage.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Central Locking Fuse Located in a Skoda Rapid?
Where is the Central Locking Fuse Located in a Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) If the central locking in your Skoda Rapid suddenly stops working, and the remote battery is charged, first check the status of the respective fuse, …
How to reset the service in the Skoda Rapid?
How to reset the service in the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial we can see how to reset the service in the Skoda Rapid, an extremely simple and quick operation, to be carried out only after comple…
How to reset the service in the Skoda Rapid?
How to reset the service in the Skoda Rapid?
Skoda Rapid (2012-2019 / MK 1) In this tutorial, we can see how to reset the service in the Skoda Rapid, an extremely simple and quick operation, to be done only once all scheduled…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos