Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Fabia
  6. : How do you remove the rear light of the Škoda Fabia?

Skoda Fabia - Video tutorial

Model: Skoda Fabia 5J, Mark2 - Years 2007-2014
Part: Tail light
Operation: How do you remove the rear light of the Škoda Fabia?

In order to remove the rear light of the Škoda Fabia, you need to open the rear door so that you have access to the side of the trunk where the light needs to be removed. Here, you will be able to locate a securing screw that needs to be completely loosened. This way, the optical unit can be extracted from its housing, disconnecting the underlying connectors as well. Once the optical unit has been removed from its position, you can connect the new one to the connectors, insert it into its housing, and secure it with the screw.


Posted on 11 July 2023 by ScegliAuto



How do you remove the rear light of the Škoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) The removal of the rear light of the Škoda Fabia is done by opening the rear door, so that it is possible to access the screws that fix the optical g
How do you replace the fog light of the Škoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) In order to replace the fog light of the Škoda Fabia, you need to use an object like a screwdriver to pry and detach the trim next to the correspondi
How do you reset the tire pressure warning light on the Škoda Fabia?
Skoda Fabia (2014-2021 / NJ, Mark3) To reset the Service light on the Škoda Fabia, you need to turn on the instrument panel so that you can press the buttons next to the central display

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos