Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel and Mirror on a Skoda Fabia

Model: Skoda Fabia Mark3, NJ - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Door trim panel

See other generations:
Video tutorial

In this video, learn how to remove the door panel and the mirror on a Skoda Fabia. Start by removing the window switch with a plastic tool to avoid scratching the panel or the bodywork; then disconnect the electrical part.

Under the door handle, there is a small opening that allows you to insert the tip of a small screwdriver and lever to remove the top part of the handle. Below, you will find two screws to remove, while at the back of the panel, there is another screw to take out, and we discover that under the speaker, there is yet another screw.

After that, you can lever around the panel, and once you have pulled it away from the bodywork, disconnect the electrical contacts still attached, such as the speaker. Now remove the connections for the electric mirror and then take off the inner cover of the mirror: unscrew the 15mm nut and also remove the mirror.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Removing the External Mirror on Skoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) How to remove the external mirror from the car? Let's see how to detach the mirror from the external casing on Skoda Fabia. Leverage between the peri…
How to Replace the External Rear-View Mirror on a Skoda Fabia
How to Replace the External Rear-View Mirror on a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before you start, open the front door of your Skoda Fabia. Begin by removing the window switch panel. Next, you will need to remove the door panel an…
Where to find the OBD port of the Skoda Fabia 3
Where to find the OBD port of the Skoda Fabia 3
Skoda Fabia (2014-2021 / Mark3, NJ) To locate the OBD port on your Skoda Fabia Mk3, follow these steps. First, open the driver's door and enter the cabin, then shift your focus to the l…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos