Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Speakers in Your Skoda Fabia

Model: Skoda Fabia Mark2, 5J - Years 2007-2014
Part: Speaker

This short video teaches you how to remove the front speakers in your Skoda Fabia (the procedure is also valid for other makes and models, such as Volkswagen and Audi). First, after detaching and removing the door panel covering the speakers, pull out the rubber seal. Next, using a drill and a 9 mm drill bit, unscrew the screws securing the speaker. Once done, disconnect and extract your speaker using a flat screwdriver. Of course, before removing the speaker, do not forget to disconnect all wiring.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of Your Skoda Fabia
How to Remove the Door Panel of Your Skoda Fabia
Skoda Fabia (2007-2014 / Mark2, 5J) How to remove the door panel of your Skoda Fabia? Before starting the disassembly, disconnect the battery terminals located in the front engine compa…
Where to Find and How to Access the Fuse Box on a Skoda Fabia?
Where to Find and How to Access the Fuse Box on a Skoda Fabia?
Skoda Fabia (1999-2007 / 6Y, Mark1) The fuse box on your Skoda Fabia is located on the left side of the dashboard. To access it, start by opening the driver's side front door. Then, ins…
Where is the OBD port located in the Skoda Fabia 3?
Where is the OBD port located in the Skoda Fabia 3?
Skoda Fabia (2014-2021 / Mark3, NJ) To be able to find the OBD port on your Skoda Fabia Mk3, just follow these steps. First, open the driver's side door and go inside the cabin, then sh…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos