Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

To reset the Service light of the Smart car, you need to press and hold the button located in the bottom left of the instrument panel while it is turned off. By continuing to hold it down, you can insert the ignition key into the ignition switch and turn it. In this way, you will notice that the Service light will start flashing and the maintenance interval will be reset after a few seconds, and the wrench light will disappear as well. At the end of the operation, you can turn off the panel by turning the key.

Posted on 14 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to perform the service and reset the service light on the Smart Roadster
How to perform the service and reset the service light on the Smart Roadster
Smart (2003-2005 / 452, Roadster) In this guide we will see the instructions that will allow us to perform the routine maintenance check, and then reset the service light of the Smart…
How do you reset the Service light on the Smart Roadster?
How do you reset the Service light on the Smart Roadster?
Smart (2003-2005 / 452, Roadster) It will be possible to completely reset the Service light displayed on the instrument panel of the Smart Roadster by holding down the button located …
How do you reset the Service light on the Smart car?
How do you reset the Service light on the Smart car?
Smart (1998-2007 / 450) From the Smart instrument panel, to completely make the Service light disappear, you need to activate the instrument panel by inserting the ignition …

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos