Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Smart ForFour EQ?

Model: Smart Forfour MK 2, W453 - Years 2014-2021
Part: Fuse box

In this video we can see where the fuses are located in the Smart ForFour EQ and what their respective diagrams are, to consult in case we need to check the fuses of a malfunctioning device. As shown, we find the first and only fuse box inside the passenger compartment, precisely behind the glove compartment on the driver's side. To access it, simply open the drawer and release it from the dashboard. In case of a blown fuse, make sure to use a replacement with equivalent specifications and operate with the vehicle turned off, so as not to cause any damage.

Posted on 16 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Smart Forfour?
Where are the fuses located in the Smart Forfour?
Smart Forfour (2004-2006 / MK 1, W454) All the fuses of the Smart Forfour can be found inside the only fuse box that will be present inside the vehicle: this will be located in the interio…
Where are the fuses located in the Smart Forfour EQ?
Where are the fuses located in the Smart Forfour EQ?
Smart Forfour (2014-2021 / MK 2, W453) All the fuses of the Smart Forfour EQ are located inside the appropriate fuse boxes that are installed on the vehicle: these can be found in two inte…
Where are the fuses located in the Smart Forfour EQ?
Where are the fuses located in the Smart Forfour EQ?
Smart Forfour (2014-2021 / MK 2, W453) On board the Smart Forfour EQ, you can identify the fuses that regulate the operation of the devices installed on the vehicle: in this type of vehicl…

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos