Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front windshield wipers on the Smart ForTwo?

Model: Smart Smart 451 - Years 2007-2015
Part: Windshield wipers

In this tutorial we can see how to replace the front windshield wipers on the Smart ForTwo, an extremely simple and quick operation. First of all, make sure that the wipers are in the resting position, if not, activate them and stop them as soon as they reach it, then lift them completely. Press the two clips on the brush joint, rotate it outward and separate it from the rod. At this point, all that remains is to position the replacement and press it firmly, in order to lock the pin to the joint. Finally, repeat the operation for the opposite windshield wiper.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wipers of the Smart Fortwo
How to replace the wipers of the Smart Fortwo
Smart (2014-2022 / 453) This short and simple guide will show us how to disassemble and replace the windshield wipers (front and rear) of the Smart Fortwo. First of all, let…
Guide to replacing the windshield of the Smart Fortwo
Guide to replacing the windshield of the Smart Fortwo
Smart (2007-2015 / 451) In this guide we will see the instructions that will allow us to disassemble and replace the windshield of the Smart Fortwo. First of all, let's move…
How do you replace the windshield wipers on the Smart ForTwo?
How do you replace the windshield wipers on the Smart ForTwo?
Smart (1998-2007 / 450) In order to replace the windshield wipers of the Smart ForTwo, you need to lift the small plastic cover at the base of the arm that controls the move…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos