Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the windshield wiper blades of the Smart car?

Model: Smart Smart 450 - Years 1998-2007
Part: Windshield wipers

To replace the windshield wiper blades of the Smart, you need to lift the arms that control their movement, so that the blades are not in contact with the windshield: once they have been lifted, you will need to tilt the blades in relation to the arms. This way, it will be possible to detach the corresponding hooks that secure the blades to their housing: by doing so, you can position the new ones on the arms, securing them with the appropriate hooks and repositioning them on the windshield. By doing this, you can verify their correct operation.

Posted on 5 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Wiper Blades on the Smart Fortwo 451
Replacing the Wiper Blades on the Smart Fortwo 451
Smart (2007-2015 / 451) In this short and simple video, learn how to remove and replace the wiper blades on the Smart Fortwo 451, as well as the 453. First, move to the fron…
How to Replace the Wipers on a Smart 451
How to Replace the Wipers on a Smart 451
Smart (2007-2015 / 451) This brief video tutorial shows the necessary steps to replace the front wipers on a Smart 451. To remove the old wiper blades, first lift them from …
How to Replace the Wiper Blades on a Smart ForTwo?
How to Replace the Wiper Blades on a Smart ForTwo?
Smart (2014-2022 / 453) As seen in this tutorial, replacing the wiper blades on a Smart ForTwo is an extremely simple and quick task. First, switch off the vehicle and lift …

    Frequently Asked Questions

    • Smart 2004-2006 - Where is the wiper water tank located on the Smart? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos