Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Wiper Blades on a Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Windshield wipers

How do you replace the wiper blades on a Smart? Let's see how to remove the blades. Take the front wiper blade (to be replaced) in your hands, gently pull the moving blade (without breaking it) and slide it off the operating arm. Fit the new blade onto the arm (if the blade is not original, detach the piece as shown in the video), you will hear a click when it is securely attached. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second blade. Test the new blades fitted. Turn on the ignition and operate the wipers using the control levers.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Window Switch Button on a Smart ForTwo
How to Replace the Window Switch Button on a Smart ForTwo
Smart (2007-2015 / 451) Before starting, sit in the driver's seat of your Smart ForTwo. Begin by prying off and removing the plastic around the window switch button using a …
How to Remove the Window Switch Button on a Smart ForTwo
How to Remove the Window Switch Button on a Smart ForTwo
Smart (1998-2007 / 450) Before you begin, open the driver's door of your Smart ForTwo and then sit in the driver's seat. Start by prying off and removing the plastic surroun…
How to Remove the Window Regulators from a Smart Fortwo
How to Remove the Window Regulators from a Smart Fortwo
Smart (1998-2007 / 450) How to remove the window regulators from a Smart Fortwo? Here’s the guide. Unscrew the glass rail pins using a socket wrench with the appropriate bit…

    Frequently Asked Questions

    • Smart 2004-2006 - Where is the wiper water tank located on the Smart? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos