Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse box diagram of the Smart ForTwo Electric Drive 453

Model: Smart Smart 453 - Years 2014-2022
Part: Fuse box

The guide shows the layout of the fuse box and the specifications of the protection elements of the Smart ForTwo Electric Drive 453; inside the vehicle's owner's manual, there is a specific section on the composition of the fuse box including both the location of the individual fuses, their function, and the allowed protection current; it is recommended to check this document also based on any installed optional features. The fuse box is located under the left side of the dashboard. For example, the fuse for the front windshield wipers is number 2, with an interruption current of 25 Amps.

Posted on 18 December 2024 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Smart ForTwo?
What is the fuse layout of the Smart ForTwo?
Smart (2014-2022 / 453) In this video we can see where the fuse box is located in the Smart ForTwo and what is the corresponding diagram, useful in case we need to check the…
How to know the fuse diagrams of a Smart Fortwo
Smart (2014-2022 / 453) In this tutorial we can see the fuse assignment diagrams for a Smart Fortwo car. The fuse box diagram inside the vehicle cabin has fuses assigned to:…
What is the Smart ForTwo fuse scheme?
What is the Smart ForTwo fuse scheme?
Smart (2014-2022 / 453) In this video we can see the position of the fuse boxes, and the relative diagrams, in the Smart ForTwo 453, to be consulted in case we need to check…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos