Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

On the instrument panel of the Smart 451, the Service light that appears can be reset by holding down the button located on the left side of the instrument panel. While holding it down, you will need to insert the ignition key into the appropriate slot on the central tunnel and turn it. This will turn on the instrument panel and you can continue to hold down the button: after a few seconds, you will see that the maintenance light will turn off completely. To verify that the reset has been successful, simply turn off and turn on the instrument panel.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) To make the Service light disappear from the instrument panel of the Smart 451, you will need to hold down the button located on the left side of the…
How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) The procedure for resetting the Service light on the Smart 451 involves pressing and holding the button located on the left side of the instrument pa…
How do you reset the Service light on the Smart 451?
How do you reset the Service light on the Smart 451?
Smart (2007-2015 / 451) In order to reset the Service light of the Smart 451, you need to press and hold the button located on the left side of the instrument panel while it…

Removing the Front Arm Bushing of a Hyundai Getz

Let's look at removing the front arm bushing of a Hyundai Getz. First, place the car on a column lift and loosen the wheel nuts with a telescopic spanner, then remove the wheel. Use a socket spanner to unscrew the lower securing bolt of the arm and the bolt mounted under the wheel hub, then unscrew the bolts on the upper part of the arm (as shown in the video). Remove the bushing from the bolt housing. Always compare the parts to be replaced with the new ones; if they are suitable, you can install them. Start the installation of the new part: fit the new bushing and tighten all bolts to the specified torque. Double-check the correct tightening of the parts. Refit the wheel to complete the job.

Watch the video!


by ScegliAuto

More videos