Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Meriva
    4. : How to replace the gearshift gaiter on Opel Meriva

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Gearshift gaiter
Operation: How to replace the gearshift gaiter on Opel Meriva

Do you want to replace the gearshift gaiter on Opel Meriva? Let's see how to do it in this video: we unhook the frame of the cap from the plastic of the covering on the central tunnel (we cut the plastic clamp with a nipper). Once the cap to be replaced has been removed, let's go and mount the new piece. We carry out the reassembly: we assemble the cap to the plastic frame, then, we insert the cover into the shift rod (we weld the clamp as in the video). We lower the cap until it fits into the plastics of the central tunnel. We test the correct assembly of the previously assembled pieces.


Posted on 20 October 2023 by ScegliAuto



How to replace the gearshift gaiter on an Opel Meriva
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) Before we begin, we will have to sit in the driver's seat of our Opel Meriva. So let's begin to disengage and lift the gear lever boot, using a flat-
How to replace the gearshift and brake gaiter on opel Meriva
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) How to replace the leather gearshift gaiter on Opel Meriva? Let's see in this video how to proceed: using a special lever (plastic or metal) release
How to replace the battery in the key of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) The video shows in full how to change the cover of an Opel Meriva key including also how to change the battery key. It is very simple: you will have

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos