Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you program the Smart key?

Model: Smart Smart 451 - Years 2007-2015
Part: Key

In order to program the key of the Smart car, you need to connect a diagnostic tool to the OBD port of the vehicle, after the blank key has been inserted into its slot: the OBD port is located immediately below the steering column. Once the connection is established, you can select the model of the car and its corresponding version, then follow the tutorial instructions to ensure that the key is properly programmed. After the operation is completed, you need to disconnect the scanner and verify that the key is working.

Posted on 14 April 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Program the Key of a Smart 454 After Replacing the Battery?
How to Program the Key of a Smart 454 After Replacing the Battery?
Smart (2004-2006 / 454, Fourfour1) When the battery of the Smart 454 ignition key runs low and needs replacing, it may be necessary to program its code; otherwise, the ECU will not rec…
How to Program the Smart Key
How to Program the Smart Key
Smart (2007-2015 / 451) If you need to program a second key for your vehicle, follow the instructions in this description and refer to the images in the video. First, connec…
How do you program the Smart key?
How do you program the Smart key?
Smart (2007-2015 / 451) It will be possible to program a new key for the Smart by inserting the blank key into the corresponding block and then turning it to start the instr…

    Frequently Asked Questions

    • Smart 1998-2007 - What to do if the key gets stuck in the Smart? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos