Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Smart ForTwo?

Model: Smart Smart 453 - Years 2014-2022
Part:

The tire pressure warning light that appears on the Smart ForTwo's instrument panel can be reset by inflating the tires until they reach the recommended pressure value. Once this operation has been done, you will need to turn on the instrument panel. Then you will need to navigate the menu that appears on the instrument panel to select the "Tyre pressure monitor" option: by doing this, a confirmation message will appear, to which you must respond with "Yes". This way, the warning light will disappear from the instrument panel and can be turned off completely.

Posted on 25 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Smart ForTwo?
How do you reset the tire pressure warning light on the Smart ForTwo?
Smart (2014-2022 / 453) To reset the tire pressure warning light on the Smart ForTwo, you will need to inflate the tires until they reach the recommended pressure value: thi…
Reset of the tire pressure warning (TPMS) for the Smart Fortwo.
Reset of the tire pressure warning (TPMS) for the Smart Fortwo.
Smart (2014-2022 / 453) Briefly, we will see the instructions on how to reset the tire pressure warning light on the Smart Fortwo. Before resetting the TPMS sensors, it is n…
How to Remove the Gear Knob from a Smart ForTwo
How to Remove the Gear Knob from a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before you begin, sit in the driver's seat of your Smart ForTwo. To carry out this removal safely, it is strongly recommended to switch off the engin…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos