Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the armrest on the Smart Fortwo

Model: Smart Smart 453 - Years 2014-2022
Part: Accessory kit

Below we will see the information that will allow us to install the armrest on the Smart Fortwo, in simple and quick steps. First, we get on board the car and start installing the armrest support on the central tunnel of the car; then we fix the armrest with the screws provided in the kit (installation may vary depending on the model), as shown in the video. Once the armrest is properly fixed, we will check its correct sliding and the functioning of the opening of any storage compartment, following the video tutorial until the end!

Posted on 27 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Armrest on the Smart 451?
How to Install the Armrest on the Smart 451?
Smart (2007-2015 / 451) To install the armrest on the seat of the Smart 451, tilt the corresponding seat backrest forward to lift the seat upholstery starting from the botto…
How to Install the Armrest on the Smart 453?
How to Install the Armrest on the Smart 453?
Smart (2014-2022 / 453) To install the armrest on the Smart 453, insert the corresponding support into the central tunnel, fitting it into the housing formed by the cup hold…
How to Install the Clutch Actuator on the Smart Fortwo 451
How to Install the Clutch Actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's tutorial video, you will learn how to install the clutch actuator on the Smart Fortwo 451 by following the instructions below. First, lift…

    Frequently Asked Questions

    • Smart 2007-2015 - Where does the Aux cable connect to the Smart 451? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos