Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Smart Bumper

Model: Smart Smart 450 - Years 1998-2007
Part: Front bumper

On this vehicle, replacing the front bumper involves removing the entire bodywork except for the headlights. The video also shows how to proceed with the removal of these. However, we are interested in removing the screws that anchor the bumper: these are located on both sides inside the door, and one is situated under the small triangle at the top, which obviously needs to be removed. Also, disconnect the indicator and headlight connectors. For the rear, the screws to remove are all external and easily identifiable along the bumper perimeter, with the last two located in the central part near the number plate holder.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear bumper of the Smart Fortwo
Disassembly of the rear bumper of the Smart Fortwo
Smart (1998-2007 / 450) Let's see below the step-by-step instructions that will allow us to disassemble and replace the rear bumper of the Smart Fortwo. First, we open the r…
How to remove the front bumper of a Smart ForTwo
How to remove the front bumper of a Smart ForTwo
Smart (2004-2006 / Fourfour1, 454) Before we can begin, we will have to go and open the doors of our Smart ForTwo. So let's start by unscrewing and removing the screws that secure the …
How to remove the bumpers (front and rear) of the Smart Fortwo
How to remove the bumpers (front and rear) of the Smart Fortwo
Smart (1998-2007 / 450) The following steps will show us how to disassemble and remove the bumpers (front and rear) of the Smart Fortwo. Let's start by disassembling the rea…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos