Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : Disassembly of the Smart Fortwo headlight

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: Headlight
Operation: Disassembly of the Smart Fortwo headlight

In this video tutorial we will see how to remove the headlight of a Smart Fortwo and in the meantime we will see how to remove the entire front part of the car. To disassemble the headlight it is necessary to first disassemble the front bumper, opening the engine hood and removing the screws that we find above the bumper. Then we go to remove the screws that we find instead under the bumper, as shown in the video. At this point we remove the headlight bolts with a 10 mm wrench and we go to detach the headlight from the car, disconnecting the electrical connector and that of the headlight regulator.


Posted on 21 December 2023 by ScegliAuto



Disassembly of the Smart Fortwo headlight
Smart (2007-2015 / 451) In the video tutorial we will see how to remove the headlight of a Smart Fortwo 450; this operation will also allow us to access the bulbs to replace
How to remove the headlight of a Smart Fortwo
Smart (1998-2007 / 450) Do you want to remove the headlight of a Smart Fortwo? Let's see together how to proceed with the disassembly in the video: let's disassemble the pla
How to remove the gear knob of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we begin, we will have to sit in the driver's seat of our Smart ForTwo. In order to be able to carry out this disassembly in complete safety,

    Frequently Asked Questions

    • Smart 1998-2007 - How do you change the light bulb on a Smart? Read Answer
    • Smart 2007-2015 - How do I replace the parking light bulb on the Smart 451? Read Answer
    • Smart 2014-2022 - How to remove the Smart headlight? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos