Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo rear light bulb replacement

Model: Smart Smart 451 - Years 2007-2015
Part: Tail light bulb

Today we will see how to remove and replace the rear light bulbs in a second generation Smart Fortwo. First of all we go to open the tailgate of the trunk and we go to open the side plastic flap by pressing the tabs: then we remove the coating and go directly to pull the bulb holder that we find inside, disconnecting the electrical connector of the bulbs. At this point we can remove all or the bulb that interests us by replacing it: to do this we slightly rotate the lamp to extract it and reassemble it by inserting it and turning it slightly.

Posted on 1 November 2020 by ScegliAuto

Video tutorial

Related tutorials

Smart Fortwo rear light bulb replacement
Smart Fortwo rear light bulb replacement
Smart (2007-2015 / 451) Let's see in this short guide how to remove and replace the Smart Fortwo taillight bulbs, following the instructions below. First we open the rear do…
Smart Fortwo rear light bulb replacement
Smart Fortwo rear light bulb replacement
Smart (2007-2015 / 451) In this video tutorial we will see how to remove and replace the rear light bulb of a Smart Fortwo. First we open the trunk lid and we go to remove t…
Removing the rear light on Smart Fortwo 453
Removing the rear light on Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial we will see how to disassemble the rear light on a Smart Fortwo 453, following these simple steps. First of all we open the bo…

How to Change the Glow Plugs on a Hyundai Santa Fe

In this video, see how to remove and replace the glow plugs on your Hyundai Santa Fe. Pull the lever to open the engine compartment located at the bottom left of the dashboard, lift the bonnet, and secure it. Follow the video for the tools to use for disassembly. Remove the plastic engine cover and the air filter kit; you will see the engine head bare without plastics. Unscrew the coils using a socket wrench and disconnect the power cables. Once all the coils are removed, unscrew the glow plugs from the head and take them out. To remove the other coils and glow plugs, you need to uncover the metal protection from the head; unscrew these as well and prepare to install the new glow plugs. Be careful not to let any debris fall into the engine head while unscrewing the glow plugs. It is advisable to vacuum the glow plug wells before disassembly.

Watch the video!


by ScegliAuto

More videos