Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on Smart Fortwo 453

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

See other generations:
Video tutorial

In this video tutorial, we will see how to remove the rear light on a Smart Fortwo 453 by following these simple steps. First, open the boot lid and use a Torx screwdriver to unscrew the side fixing screws of the light; then gently pull it outwards, and disconnect the electrical connector of the bulbs, as illustrated in the video.

At this point, open the tabs to remove the bulb holder and access the bulbs; proceed with any replacement and reassemble everything by applying the reverse procedure!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper and Wing on a Smart Fortwo 453
Removing the Front Bumper and Wing on a Smart Fortwo 453
Smart (2014-2022 / 453) In this video tutorial, follow the instructions to remove the front bumper along with the wing, as a single piece, on a Smart Fortwo 453 in Brabus tr…
Installing Rear Camera on Smart Fortwo 453
Installing Rear Camera on Smart Fortwo 453
Smart (2014-2022 / 453) In today's video, you will see the instructions for removing the rear camera on a Smart Fortwo 453. First, obtain a compatible rear camera for your c…
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
How to Remove the Rear Headlamp Bulb of a Smart Fortwo
Smart (2014-2022 / 453) How to remove the rear headlamp bulb of a Smart Fortwo? Let's look at replacing the damaged part. Remove the plastic panel covering the rear headlamp…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos