Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs in a Smart

Model: Smart Smart 450 - Years 1998-2007
Part: Light bulb

In today's video, see how to replace the front headlamp bulbs in the first series of the Smart 450. As the bonnet does not open (the engine is located at the rear), proceed differently. Locate the covers on the bonnet (the fake air intakes) and remove them. Access the bulb compartment. Remove one unit first and then the second if necessary. Test their proper functioning and then reassemble everything to complete your current task. As you have seen, this is a simple and quick job that can be done immediately.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs in a Smart ForTwo?
How to Replace the Front Headlight Bulbs in a Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, you will see how to replace the front headlight bulbs in a Smart ForTwo, a very simple and quick operation. First, ensure that the …
How to Replace the Rear Headlamp Bulbs on a Smart Fortwo
How to Replace the Rear Headlamp Bulbs on a Smart Fortwo
Smart (2014-2022 / 453) How to remove the rear headlamp of a Smart Fortwo to replace the bulbs? Follow these steps: open the boot lid, use a screwdriver to unscrew the secur…
Replacing Dipped Beam Bulbs on Smart Fortwo
Replacing Dipped Beam Bulbs on Smart Fortwo
Smart (2007-2015 / 451) Want to remove the damaged bulbs from your Smart Fortwo? First, remove the front bonnet and locate the rear cover of the front headlights. Remove the…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos