Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo and Roadster clutch actuator replacement

Model: Smart Smart 450 - Years 1998-2007

We see in this video the instructions to be able to disassemble and replace the clutch actuator on a Smart Fortwo and Roadster. First we go to identify the clutch actuator, which is located on the rear and under the engine, as shown in the video; then, to disassemble it, we are going to unscrew its fixing screws with a torx wrench. Once all the screws have been removed, let's disconnect its electrical connector by pressing on the side tabs; all that remains is to replace the clutch actuator, applying the reverse procedure for reassembly!

Posted on 10 December 2020 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Actuator on the Smart Roadster?
How to Replace the Clutch Actuator on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) You can replace the clutch actuator on the Smart Roadster by lifting the car to access the components underneath: once the vehicle is lifted, you can…
How does the clutch actuator of the Smart Fortwo work?
How does the clutch actuator of the Smart Fortwo work?
Smart (1998-2007 / 450) In this short and simple guide, we will see how the clutch actuator of the Smart Fortwo works. The clutch actuator of this car works electronically a…
How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos