Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light in a Smart Fortwo

Model: Smart Smart 453 - Years 2014-2022
Part: Tire pressure warning light

This short video will teach us how to reset the tire pressure warning light in a Smart Fortwo. Turning on of the aforementioned warning light indicates an anomaly in the tire pressure value, which will therefore be below or above the standard values (from 1.8 to 2.5 bar). To reset this warning light, you will have to use the directional arrows and the ok button found on the left side of the steering wheel controls: go to the settings menu and click on the item "Tire pressure check", then the question "Store current pressures as new indicative values? "click yes and then ok. At this point, the light should go out.

Posted on 15 January 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Smart ForTwo?
How do you reset the tire pressure warning light on the Smart ForTwo?
Smart (2014-2022 / 453) To reset the tire pressure warning light on the Smart ForTwo, you will need to inflate the tires until they reach the recommended pressure value: thi…
Reset of the tire pressure warning (TPMS) for the Smart Fortwo.
Reset of the tire pressure warning (TPMS) for the Smart Fortwo.
Smart (2014-2022 / 453) Briefly, we will see the instructions on how to reset the tire pressure warning light on the Smart Fortwo. Before resetting the TPMS sensors, it is n…
How to reset the tire pressure sensor of a Smart ForTwo?
How to reset the tire pressure sensor of a Smart ForTwo?
Smart (1998-2007 / 450) To reset the tire pressure light on a Smart ForTwo, start by turning on the instrument panel without starting the engine. Look for the reset button l…

Other guides you may be interested in

How to Remove the Engine Oil Filter of the Peugeot 308

How do you remove the engine oil filter of the Peugeot 308? Follow this guide to proceed with the replacement. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Using a socket wrench, unscrew the large securing bolt of the container cap where the oil filter is located (engine compartment under the ventilation pipe). Drain the used oil from under the engine sump. Remove the worn oil filter and position a new one, ensuring it adheres well around the walls of the housing. Finally, refit the ventilation pipe and top up the engine oil. Close the front bonnet last.

Watch the video!


by ScegliAuto

More videos