Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Tire Pressure" light on a Smart ForFour

Model: Smart Smart 451 - Years 2007-2015
Part: Warning light – error code

Using the portable compressor supplied with our Smart ForFour, we begin by checking and eventually inflating the tires, so as to reach the pressure recommended by the manufacturer in all tires. Once this is done, we will have to go and sit in the driver's seat. We then proceed by going to activate the instrument panel. After that, we will have to go to open the settings menu, and then we will have to go to select "Tire Pressure Monitor". At this point, we will have to confirm that we intend to carry out a new tire pressure reading. When we have completed this last step, the light will turn off automatically, and we will have finished the reset.

Posted on 30 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Smart (2014-2022 / 453) The TPMS reset of the Smart model 453 should only be performed after completing the tire pressure adjustment operations. The steps to follow are: 1) …
Smart (2014-2022 / 453) If you want to quickly and easily reset the maintenance warning light on your Smart Forfour, all you have to do is follow the instructions in our new…
Smart (2004-2006 / 454, Fourfour1) The operation of resetting the Service light of the Smart Forfour is done by holding down the button located in the upper left part of the instrument…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - What does error code P1700 indicate on a Smart Fortwo? Read answer
    • Smart 1998-2007 - Why does the ESP light turn on in the Smart 450? Read answer
    • Smart 2007-2015 - What does the yellow triangle light with exclamation mark on a Smart ForTwo mean? Read answer

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos