Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo clock adjustment

Model: Smart Smart 453 - Years 2014-2022
Part: Clock

Hi everyone! Today we are going to see an adjustment that will seem trivial to most but which is sometimes more complicated than expected. We are on a Smart Fortwo, and we are going to set the time on our digital panel. First of all turn on the ignition, then hold down the button at the bottom right, under the red light that looks like an exclamation point. Press and hold for several seconds (many people press for a moment and give up thinking it doesn't work) until the time starts flashing. Now release the button for a second and start holding it again. This way the hour will advance quickly. When you get to the right value, release the button.

Posted on 23 March 2021 by ScegliAuto

Video tutorial

Related tutorials

Smart Fortwo clock adjustment
Smart Fortwo clock adjustment
Smart (1998-2007 / 450) Today we will see how to adjust the time and date of a Smart Fortwo first series; the operation is very simple and does not require the use of any to…
Clock adjustment on Smart Fortwo
Clock adjustment on Smart Fortwo
Smart (2007-2015 / 451) To set the clock on the instrument panel of your Smart, start by turning on the panel itself, using the special ignition key. On your right, in the l…
How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos