Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the armrest on Smart cars

Model: Smart Smart 453 - Years 2014-2022

At the back and bottom of the armrest, as shown in the video, there are two easily removable plastic protectors (one on each side). Disassemble them by hand or using a plastic wedge or small flat head screwdriver. Unscrew the two screws on each side present here and now uncovered, then remove the cigarette lighter by simply pulling it by hand and disconnecting the connector. At this point you can extract the armrest from its seat and obviously proceed backwards for reassembly. As you can see, this is a simple process, even if it takes some time. Good job!

Posted on 13 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to install the armrest on the Smart Fortwo
How to install the armrest on the Smart Fortwo
Smart (2014-2022 / 453) Below we will see the information that will allow us to install the armrest on the Smart Fortwo, in simple and quick steps. First, we get on board th…
How do you install the armrest of the Smart 453?
How do you install the armrest of the Smart 453?
Smart (2014-2022 / 453) In order to install the armrest on the Smart 453, you need to insert the corresponding support on the central tunnel, inserting it into its housing f…
How to install the armrest of the Smart 451?
How to install the armrest of the Smart 451?
Smart (2007-2015 / 451) In order to install the armrest on the seat of the Smart 451, the backrest of the corresponding seat must be tilted forward, so that the seat upholst…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

How to Change the Glow Plugs on a Hyundai Santa Fe

In this video, see how to remove and replace the glow plugs on your Hyundai Santa Fe. Pull the lever to open the engine compartment located at the bottom left of the dashboard, lift the bonnet, and secure it. Follow the video for the tools to use for disassembly. Remove the plastic engine cover and the air filter kit; you will see the engine head bare without plastics. Unscrew the coils using a socket wrench and disconnect the power cables. Once all the coils are removed, unscrew the glow plugs from the head and take them out. To remove the other coils and glow plugs, you need to uncover the metal protection from the head; unscrew these as well and prepare to install the new glow plugs. Be careful not to let any debris fall into the engine head while unscrewing the glow plugs. It is advisable to vacuum the glow plug wells before disassembly.

Watch the video!


by ScegliAuto

More videos