Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo spark plug removal instructions

Model: Smart Smart 451 - Years 2007-2015
Part: Spark plugs

In this video tutorial we will see how to remove and replace the spark plugs of the engine of a second series Smart Fortwo. First of all, we open the boot lid and remove the first lower panel: we thus access the part of the engine compartment. At this point we are going to identify the cables of our spark plugs and disconnect them: then with a socket wrench we go to unscrew them, and then finish them by hand. Once all the spark plugs have been removed, we go to replace them with the new ones, of the right type, and we go to reassemble them by first screwing them by hand and then tightening them with the wrench (if possible dynamometric).

Posted on 15 May 2021 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the engine of the Smart Fortwo.
Guide to disassembling the engine of the Smart Fortwo.
Smart (1998-2007 / 450) Let's see in this guide the instructions that will allow us to disassemble and replace the entire engine block of the Smart Fortwo. First, we lift th…
Guide to replacing the starter motor of the Smart Fortwo 0.8 CDI.
Guide to replacing the starter motor of the Smart Fortwo 0.8 CDI.
Smart (1998-2007 / 450) In this video tutorial, we will see the main steps useful for disassembling and replacing the starter motor of the Smart Fortwo 0.8 CDI. First, we op…
Instructions for removing the starter motor on the Smart Fortwo 450
Smart (1998-2007 / 450) Let's find out the procedure needed to disassemble and replace the starter motor on the Smart Fortwo 450, first series, by following the instructions…

Other guides you may be interested in

How to Remove the Dome Light in a Mercedes C-Class

In this video, see how to replace the bulb or LED in the dome light of a Mercedes C-Class. Using a screwdriver or plastic trim tool, pry between the dome light cover and its perimeter (without breaking the plastic), remove the grille from the dome light, and then take out the clear plastic cover. Replace the damaged bulb with a new one (same size and voltage). Reinstall the plastic cover in its housing (press it in with your hands until the tabs are fully secured). Test the light's proper functioning before reinstalling the piece.

Watch the video!


by ScegliAuto

More videos