Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the power window button on a Smart ForTwo

Model: Smart Smart 451 - Years 2007-2015
Part: Power window switch

Before starting, we will have to sit in the driver's seat of our Smart ForTwo. So let's start by disengaging and removing the plastic located around the window lifter button, using a slotted screwdriver to pry. Next, we will have to disengage and extract the window lifter button from its housing. At this point, we will have to disconnect the rear electrical connector. When we have completed this step, we will have successfully completed the disassembly. To fit the new window lifter button, we will have to follow these instructions in reverse, and we will have completed the replacement.

Posted on 26 July 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the power window button on a Smart ForTwo
How to remove the power window button on a Smart ForTwo
Smart (1998-2007 / 450) Before we can start, we will have to go to open the driver's side door of our Smart ForTwo, and then we will have to sit in the driver's seat. So let…
How to remove the power window button on a Smart ForTwo?
How to remove the power window button on a Smart ForTwo?
Smart (1998-2007 / 450) Before we can begin, we will have to sit in the driver's seat of our Smart ForTwo. So let's start by inserting the tip of a thin but strong tool into…
How to Remove the Window Regulators from a Smart Fortwo
How to Remove the Window Regulators from a Smart Fortwo
Smart (1998-2007 / 450) How to remove the window regulators from a Smart Fortwo? Here’s the guide. Unscrew the glass rail pins using a socket wrench with the appropriate bit…

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos