Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : Disassembly of the front headlight of the Smart Fortwo 451

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Headlight
Operation: Disassembly of the front headlight of the Smart Fortwo 451

Let's see in this video how to remove and replace the front light on the Smart Fortwo 451, second series, in simple and quick steps. First of all we open the front hood of our car and start by unscrewing the screws that we find on the upper part of the bumper; then we unhook the front mudguard, removing the triangular plastic cover and unscrewing the screws that we find below (using a torx screwdriver). At this point we are going to unscrew the screws that we find under the headlight, disconnecting the electrical connector of the bulb to remove it and replace it with the new one!


Posted on 11 March 2024 by ScegliAuto



How to remove the third stop of a Smart ForTwo 451
Smart (2007-2015 / 451) Before we can start, we will have to get out of the cockpit of our Smart ForTwo 451, and then head towards the rear of the car. So let's start by uns
How to replace the headlight bulb on Smart Fortwo 451
Smart (2007-2015 / 451) In today's video we will see how to disassemble and replace the headlight bulb on a Smart Fortwo 451, following the instructions below. First we have
Disassembly of the Smart Fortwo headlight
Smart (2007-2015 / 451) In the video tutorial we will see how to remove the headlight of a Smart Fortwo 450; this operation will also allow us to access the bulbs to replace

    Frequently Asked Questions

    • Smart 1998-2007 - How do you change the light bulb on a Smart? Read Answer
    • Smart 2007-2015 - How do I replace the parking light bulb on the Smart 451? Read Answer
    • Smart 2014-2022 - How to remove the Smart headlight? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos