Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter on a Smart 453.

Model: Smart Smart 453 - Years 2014-2022
Part: Cabin air filter

In this video we will see how to replace the cabin filter of a Smart 453. Let's start by removing the panel located on the passenger side, under the mat. Let's open it by unscrewing the screws (it is possible to do it by hand, without the need for tools). Now, on the left, we will find the compartment, as shown at minute 0:20. We open the small door that closes the filter and with the help of a screwdriver extract it. We clean the compartment with a cloth. Now insert the new filter, close the door and screw the panel back on. This replacement operation is recommended every 15,000 kilometers.

Posted on 18 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter of the Smart Fortwo 453.
How to replace the cabin filter of the Smart Fortwo 453.
Smart (2014-2022 / 453) If you own a Smart Fortwo 453 (year 2014-2022) and want to learn how to correctly replace the cabin air filter, all you have to do is carefully read …
How do you replace the cabin filter on the Smart 453?
How do you replace the cabin filter on the Smart 453?
Smart (2014-2022 / 453) In order to replace the cabin filter of the Smart 453, you have to remove the side plastic cover of the footrest compartment, on the driver's side. O…
How to replace the air filter of the Smart 453
How to replace the air filter of the Smart 453
Smart (2014-2022 / 453) If you want to replace the air filter in the engine compartment of your Smart 453, just put into practice the steps described in the following guide …

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos