Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Smart Fortwo 453

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

If you own a Smart Fortwo 453 (2014-2022) and want to learn how to correctly replace the cabin air filter, read this guide carefully and follow the steps described. First, completely switch off the vehicle and park it safely.

Next, go to the passenger side and remove the floor mat. Once done, remove the plastic panel located beneath the glove compartment and take off the cover of the filter box on the left side. Finally, replace the old filter with the new one.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in the Smart Fortwo 450?
How to Replace the Cabin Filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) Replacing the cabin filter in the Smart Fortwo 451 takes about 20 minutes. The filter is located inside the cabin, near the accelerator pedal. To cha…
When and How to Change the Engine Oil on the Smart Fortwo
When and How to Change the Engine Oil on the Smart Fortwo
Smart (2014-2022 / 453) This video provides instructions on how and when to change the engine oil on the Smart Fortwo 453 during routine maintenance. The manufacturer recomm…
How to Replace the Wheel on a Smart Fortwo 453
How to Replace the Wheel on a Smart Fortwo 453
Smart (2014-2022 / 453) In this short video, you will find the main guide for removing and replacing the front wheel, which also applies to the rear wheel, of the Smart Fort…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos