Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in the Smart Fortwo 450?

Model: Smart Smart 451 - Years 2007-2015
Part: Air filter

Replacing the cabin filter in the Smart Fortwo 451 takes about 20 minutes. The filter is located inside the cabin, near the accelerator pedal. To change it, first remove the cover and release the two clips. Now you can pull out the air filter from its housing and insert the new filter in its place. Finally, refit the cover and the replacement is complete. It is recommended to replace the cabin filter in the Smart Fortwo 451 approximately once a year or sooner if it reaches 9,300 miles.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Smart Fortwo 450?
Where is the OBD port of the Smart Fortwo 450?
Smart (1998-2007 / 450) If you still do not know where the OBD port of your Smart Fortwo 450 (1998-2007) is located, read this guide carefully and follow the step-by-step in…
Where to Find the OBD Port of the Smart Fortwo 450
Where to Find the OBD Port of the Smart Fortwo 450
Smart (1998-2007 / 450) To locate the OBD port inside the cabin of your Smart Fortwo 450, you only need a few seconds. Follow the steps below in the order described. First, …
How to replace the cabin air filter of the Smart Fortwo.
How to replace the cabin air filter of the Smart Fortwo.
Smart (1998-2007 / 450) The air filter of the Smart Fortwo model 450 is located inside the trunk under the carpet cover. To replace the filter, we need to open the trunk and…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos