Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the car stereo on a Smart Fortwo 451

Model: Smart Smart 451 - Years 2007-2015
Part: Car stereo

In this video tutorial we see how to disassemble the car radio on a Smart Fortwo 451. First we must carefully remove the button panel under the radio. In the central hole where the push-button panel was before, insert the Allen key and unscrew the screw that holds the plastic surrounding the radio in place, carefully remove it and unscrew the screws of the car radio. Before extracting the car radio we remove the wiring and the antenna cable, after which we can completely extract the radio and finish the job. It is advisable to disconnect the car battery before carrying out the work.

Posted on 1 January 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Smart Fortwo 451.
How to replace the air filter of the Smart Fortwo 451.
Smart (2007-2015 / 451) In this new mini guide dedicated to your Smart Fortwo 451 (year 2012), we will discover how to replace the air filter correctly and without the need …
How to disassemble the car stereo on Smart Fortwo 450-451
How to disassemble the car stereo on Smart Fortwo 450-451
Smart (1998-2007 / 450) Let's see in this video how to disassemble the original car radio on a Smart Fortwo 450 and 451, first and second series respectively. First of all w…
How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…

Other guides you may be interested in

Removing VW Passat Interior Lights

Below is how to replace the bulbs in all the interior lights of this vehicle. For the lights on the roof, use a flathead screwdriver to gently lever at the side where you will release the retaining clip, pull it out, and after replacing the bulb, press it back into place. For the light above the front seats, lever (with the flathead screwdriver) directly on the transparent plastic to detach it from the retaining tabs (replace the bulbs and press it back into place). For the rear light and number plate lights, perform the same operation: lever to release the tab, replace, and press back into place.

Watch the video!


by ScegliAuto

More videos