Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
451
- Years 2007-2015 Remove the clips holding the frame in place and heat it for 15 minutes. Separate the glass from the plastic with a flat screwdriver, then unscrew the two small screws in the insert. Now we can take out the mounting bracket from the old projector. Now unscrew the projector from the bracket and place the new projector in the new bracket, and make room if necessary. Then connect the H7 bulb and the power supply and then put the projector back into the housing. Put the glass back and insert it into the housing before reheating it for about 10 minutes. Reposition the clips on the glass and on the housing, then the lamp holder on the tail of the projector and insert the bulb, connecting the two wires to the plug.
Posted on 7 April 2024 by ScegliAuto
How do you replace the headlight on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) In order to replace the front headlight of the Smart Roadster you need to open the hood and loosen the bolts that secure the front headlight cover, l
Replace low beam lights on Smart Fortwo
Smart (2007-2015 / 451) Do we want to remove the damaged bulbs of the Smart Fortwo? To begin we remove the front hood of the Smart and find the rear cover of the headlights.
Replacing the headlight bulb of the Smart Forfour 454
Smart (2004-2006 / 454, Fourfour1) In this video we will see how to remove and replace, with the headlight removed, the xenon low beam bulb of the Smart Forfour 454. First of all, let' Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.030
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |