Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light in the Smart 451

Model: Smart Smart 451 - Years 2007-2015

If the brake light located on the rear of the roof of your Smart 451 does not come on then you need to replace the bulb. Below we will find out how to do this independently. First, turn off the car and park it on a level surface. Reach the spotlight in question and unscrew all the screws that hold it in place with a suitable screwdriver. Once this is done, pull the light towards you and disconnect the bulb. At this point all that remains is to replace the latter. Finally, reposition the headlight correctly and retighten all the screws removed previously.

Posted on 18 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the license plate light on Smart 451
How to replace the license plate light on Smart 451
Smart (2007-2015 / 451) Let's see in this very short video tutorial how to replace the license plate light of a Smart 451, model produced from 2007 to 2015. The operation to…
How to remove the ceiling light of the Smart 451
How to remove the ceiling light of the Smart 451
Smart (2007-2015 / 451) Today we are going to see how to disassemble the internal ceiling light on Smart 451. We pry between the fixing plastics and the transparent ceiling …
How to reset the TPMS indicator on the Smart 451
How to reset the TPMS indicator on the Smart 451
Smart (2007-2015 / 451) In the following mini guide we will explain how to correctly and easily reset the TPMS warning light inside your Smart 451. Before starting, make sur…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

Remove the Front Door Panel on Mercedes C

Remove the front door panel on Mercedes C to access the window switch assembly. Disconnect the battery terminals in the engine compartment. Use a screwdriver to remove the screws located in the upper lever opening area and the screws in the handle (after removing the plastic screw covers). Remove the trim near the lock, unscrew any remaining screws on the door panel, and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power harness and the opening cable). Unscrew or detach the retaining clips of the window switch assembly.

Watch the video!


by ScegliAuto

More videos