Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Body Panels of the Smart Fortwo

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Body

See other generations:
Video tutorial

In today's video tutorial, we will cover the main steps to carry out a temporary repair of the plastic and polycarbonate panels of the Smart Fortwo. First, fill the damaged area of the bodywork with the same material; then use body filler to perfectly fill the surface, allowing it to dry afterwards.

At this point, use a sander to make the surface perfectly smooth; finally, apply the new layer of paint, following the video tutorial to the end!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Repair the Panels and Bumpers of the Smart Fortwo
How to Repair the Panels and Bumpers of the Smart Fortwo
Smart (1998-2007 / 450) This guide outlines important steps to repair the damaged bodywork and bumpers of the Smart Fortwo, following the instructions below. First, remove a…
How to Replace the Window Switch on the Smart Fortwo
How to Replace the Window Switch on the Smart Fortwo
Smart (2007-2015 / 451) This guide will show you how to remove and replace or repair the window switch on the Smart Fortwo. First, open the front door and carefully pry off …
How to Remove the Bonnet of the Smart Fortwo
How to Remove the Bonnet of the Smart Fortwo
Smart (2007-2015 / 451) In this guide, you will find the main instructions to remove and replace the bonnet of the Smart Fortwo, followed by aesthetic modifications to the b…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos