Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front shield of a Smart 450

Model: Smart Smart 450 - Years 1998-2007
Part: Front bumper

That of the Smart is not a bumper but an apron, because it also takes up the entire front muzzle. Let's see how to disassemble it. We have to remove the bolts that join the body from the front, removing them between the door and the frame. We also dismantle the small side deflector. We remove the arrow repeater gem. We repeat on the other side. We extract the front mask; below are screws that we remove. The front end of the car has now come away from the base of the car. The video continues with the rear cleaning of the entire shield and then its repositioning on the car following the reverse procedure.

Posted on 19 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to open the front hood on Smart Fortwo 450-451
How to open the front hood on Smart Fortwo 450-451
Smart (1998-2007 / 450) In this video tutorial we will see the instructions to open the front hood on a Smart Fortwo 450 and 451, in simple and quick steps. To open the fron…
How to replace the air filter of the Smart 450
How to replace the air filter of the Smart 450
Smart (1998-2007 / 450) If you do not want to have problems with overheating or loss of power of the engine of your Smart 450 then you must necessarily replace the air filte…
How do you replace the speakers of the Smart 450?
How do you replace the speakers of the Smart 450?
Smart (1998-2007 / 450) The Smart 450's speakers are located inside the dashboard and not behind the door panels as is generally the case. Therefore, in order to replace the…

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos