Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
450
- Years 1998-2007 The Smart 450's speakers are located inside the dashboard and not behind the door panels as is generally the case. Therefore, in order to replace the speakers, it will be necessary to disassemble the entire upper part of the dashboard: by unscrewing the relative screws and disengaging the plastic cover, it will be possible to access the speakers, which must be freed from their housing by disconnecting the connectors and unscrewing the fixing screws. Once the new speakers have been installed, the dashboard can also be re-fitted.
Posted on 12 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |