Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to replace the smart fortwo stereo speakers

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Loudspeaker
Operation: How to replace the smart fortwo stereo speakers

Let's see in this guide the steps that will allow us to disassemble and replace the speakers of the Smart Fortwo. First of all, we open the front door of our car and start disassembling and removing the speaker's plastic cover; then we unscrew the fixing screws that we find on the side, disconnecting the electrical connector that we find on the back to permanently remove the speaker, as shown in the video. At this point we install the new speaker on the door panel, following the video tutorial to the end for reassembly!


Posted on 25 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Smart 2007-2015 - How do you disassemble the Smart's speakers? Read Answer
    • Smart 2007-2015 - How to disassemble the Smart Fortwo speakers? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos