Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to replace the speakers of the Smart Fortwo

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Loudspeaker
Operation: How to replace the speakers of the Smart Fortwo

Today we will see, in this short and simple guide, the necessary instructions to disassemble and replace the front speakers of the Smart Fortwo. First, we open the front doors and start removing the plastic speaker grille, leveraging the sides with something thin; then we lever the speaker to remove it from the door panel, disconnecting the electrical connector found on the back, as shown in the video. At this point, we proceed to install the new speaker, as well as the original one, applying the reverse process!


Posted on 3 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Smart 2007-2015 - How do you disassemble the Smart's speakers? Read Answer
    • Smart 2007-2015 - How to disassemble the Smart Fortwo speakers? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos