Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front engine mount in the Smart Roadster?

Model: Smart Smart Roadster, 452 - Years 2003-2005
Part: Engine mount

In this tutorial we can see how to replace the front engine mount in the Smart Roadster, a simple operation that requires attention and good manual skills. First of all, wait for the engine to be completely cold, then lift the rear side of the vehicle, place a jack under the engine itself and remove the rear panel from the luggage compartment. Once this is done, identify the support in question, unscrew the fixing bolts and continue with its replacement. In case we need more working space, we can lower the rear deck slightly by loosening the indicated bolts.

Posted on 14 January 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight on the Smart Roadster?
How do you replace the headlight on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) In order to replace the front headlight of the Smart Roadster you need to open the hood and loosen the bolts that secure the front headlight cover, l…
How do you open the hood of the Smart Roadster?
How do you open the hood of the Smart Roadster?
Smart (2003-2005 / Roadster, 452) In order to open the front hood of the Smart Roadster, you have to go inside the passenger compartment by identifying the lever located immediately u…
Smart Roadster spark plug replacement
Smart Roadster spark plug replacement
Smart (2003-2005 / Roadster, 452) Today we will see, in this video tutorial, how to remove and replace the spark plugs of the Smart Roadster engine, following the instructions below. …

Other guides you may be interested in

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos