Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight of the Smart Roadster?

Model: Smart Smart Roadster, 452 - Years: 2003, 2004, 2005
Part: Headlight

See other generations:
Video tutorial

To replace the front headlight of the Smart Roadster, open the bonnet and loosen the bolts securing the front headlight cover, located at the top and bottom. Once the cover is removed, loosen the screws underneath and completely detach the headlights with the corresponding support, disconnecting the connector at the rear.

Once the headlights are removed, connect the new replacement parts to the connector and insert them into their housing, covering everything with the appropriate plastic cover.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light and Bulbs of the Smart Roadster
How to Replace the Rear Light and Bulbs of the Smart Roadster
Smart (2003-2005 / Roadster, 452) Below are the main steps to remove and replace the rear light and its bulbs of the Smart Roadster. First, move to the rear of the vehicle and start o…
How to Replace the Roof of the Smart Roadster
How to Replace the Roof of the Smart Roadster
Smart (2003-2005 / Roadster, 452) To replace the roof of the Smart Roadster, open the bonnet and unscrew the fixing screws of the internal compartment to access the battery underneath…
How to Open the Bonnet of a Smart Roadster?
How to Open the Bonnet of a Smart Roadster?
Smart (2003-2005 / Roadster, 452) To open the front bonnet of a Smart Roadster, access the cabin and locate the lever just below the glove compartment on the passenger side. Once this…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos