Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the radiator of the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Radiator

In order to replace the radiator of the Smart 451 it is necessary to completely loosen the screws that fix the panel of the front part of the machine, so that this is removed to give access to the components inside. The screws that fix the headlights must also be loosened by completely removing them by disconnecting the connectors; the radiator can now be removed from its housing after all hoses and connectors have been disconnected. After the old radiator has been removed, it will be possible to insert the new one, connecting and fixing it appropriately.

Posted on 6 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Radiator of the Smart Fortwo
Guide to Replacing the Radiator of the Smart Fortwo
Smart (2007-2015 / 451) In this guide, we will see the instructions that will allow us to disassemble and replace the radiator of the Smart Fortwo. First, let's open the fro…
How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…
How to replace the car radio in the Smart 451
How to replace the car radio in the Smart 451
Smart (2007-2015 / 451) In today's video we see how to replace the speakers and the car radio in the Smart 451. First we proceed by purchasing the specific components in the…

Other guides you may be interested in

Removing the Drive Shaft on a Fiat Panda

Learn how to remove the drive shaft on a Fiat Panda. Lift the car on a column lift and locate the drive shaft. Using a socket spanner, undo the securing bolts on either side of the drive shaft (remove the bolts around the plates) where it is situated. Once the part is removed, take it out of the vehicle (replace it with a new drive shaft). Finally, refit the new drive shaft (connect it on both sides) and tighten the appropriate bolts. Lower the car and test its proper functioning.

Watch the video!


by ScegliAuto

More videos