Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator Bushes on a Smart

Model: Smart Smart 451 - Years 2007-2015
Part: Alternator

If the auxiliary belt shows frayed edges, it means it is oscillating laterally while rotating, which is certainly caused by the alternator's oscillations due to worn support bushes. You can replace these bushes, but it requires quite a bit of work: removing the alternator involves lowering the engine to access the bushes more easily.
Start by disconnecting the negative terminal of the battery located under the passenger side mat; lift the vehicle, remove the protective plastics, access the belt, and remove the tensioner to slip off the belt itself; lower the car and open the rear bonnet to access the engine compartment and complete the alternator removal; at this point, remove the bush from the engine mount and then those on the alternator bracket using suitable pullers; then apply the new bushes and reassemble everything with a new auxiliary belt.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Turbo Disassembly and Lubrication
Turbo Disassembly and Lubrication
Smart (2000-2007 / ) In the video, the turbo is disassembled into all its components, cleaned thoroughly, lubricated with a special bearing oil and other uses, and reasse…
How to Remove the Alternator on a Smart Fortwo
How to Remove the Alternator on a Smart Fortwo
Smart (2007-2015 / 451) Learn how to remove the alternator on a Smart Fortwo. Lift the rear engine cover and secure it, locate the battery and disconnect the terminals (insi…
Smart W451 speaker disassembly
Smart W451 speaker disassembly
Smart (2004-2006 / 454, Fourfour1) Do we want to remove the damaged speaker from inside the Smart Fortwo door? Let's see the disassembly of the pieces. We remove the external door cove…

Other guides you may be interested in

How to Replace the Timing Belt on a Volkswagen Golf

To perform this simple operation, first lift the bonnet. Then, remove the upper engine cover and the plastic side cover that protects the timing belt. To create more space for the job, you can remove components next to the engine, such as the coolant reservoir, the windscreen washer pipe, and the fuel filter. This will allow you to remove the lower engine cover and the right wheel for better access to the area where you will be working. Now, relieve the tension from the tensioner pulley and remove the belt for replacement.

Watch the video!


by ScegliAuto

More videos