Do it yourself
| ||||
|
Smart - Video tutorial
Model: Smart Smart
- Years 2000-2007 In the video, the turbine was disassembled in all its components, carefully cleaned, lubricated with a special oil for bearings and other uses and reassembled in all its parts. In the guide we are advised to be very careful if you have to put it in the vice, as tightening it is very easy to damage it. The lubrication has affected all its components including the bearings, in the images we can see the final result has been tested with an air gun, the turbine is able to turn normally, without problems. We remind you that to carry out this type of processing it is necessary to have good mechanical skills or to contact a specialized workshop.
Posted on 18 June 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |