Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump in the Smart car?

Model: Smart Smart 451 - Years 2007-2015
Part: Fuel pump

In order to replace the fuel pump of the Smart car, you need to loosen the screws that secure the fuel tank to its housing in the lower rear part of the car. Here, it will be possible to detach the tank and locate the fuel pump on its upper part. The pump can be removed from its seat by loosening the screws that fix it inside its housing. Once the old pump has been removed, it will be possible to insert the new replacement part, securing the tank and verifying that everything works correctly.

Posted on 22 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Smart Fortwo
How to replace the fuel pump of the Smart Fortwo
Smart (2007-2015 / 451) Below we will see the main instructions that will allow us to disassemble and replace the fuel pump of the Smart Fortwo. In order to access the fuel …
Disassembly of the fuel pump (float) of the Smart Fortwo
Disassembly of the fuel pump (float) of the Smart Fortwo
Smart (2007-2015 / 451) We see in this guide the main instructions that will allow us to disassemble and replace the fuel pump or the tank float of the Smart Fortwo. First w…
How to open the fuel cap of the Smart Fortwo
How to open the fuel cap of the Smart Fortwo
Smart (2014-2022 / 453) Let's find out in this short guide how to open the petrol cap and how to refuel the Smart Fortwo. First, let's move to the right side of the car and …

Other guides you may be interested in

How to Replace the Front Headlamp Bulb on a Fiat Grande Punto

To replace the front headlamp bulb on a Fiat Grande Punto, first open the bonnet. Once done, access the rear of the headlamp where the bulb needs replacing (the bulb is of type H4). Locate the rubber cover that protects the electrical contacts and bulbs from water and moisture. Remove it by pulling on the tab. Now, pull the connector for the bulb's power supply and disconnect it from its position. At this point, push down on the top of the spring that holds the bulb in place, and you can extract the bulb from its housing. To fit the new bulb, follow the steps in reverse as shown in the images. The video also shows how to remove the position bulb, which is located just below the H4. After disconnecting the power supply, you can extract it along with the bulb holder by pressing the two tabs to release it and pulling. The bulb can then be removed from its position in the bulb holder.

Watch the video!


by ScegliAuto

More videos